Observations of Stratosphere-Troposphere Coupling During Major Solar Eclipses from FORMOSAT-3/COSMIC Constellation

Sudden tropospheric cooling and induced stratospheric warming were found during the 22 July 2009 total solar eclipse. Can the 22 July 2009 hallmark also be seen in other major solar eclipses? Here we hypothesize that the tropospheric cooling and the stratospheric warming can be predicted to occur during a major solar eclipse event. In this work we use the FORMOSAT-3/COSMIC (F3C) Global Positioning System (GPS) radio occultation (RO) data to construct eclipse-time temperature profiles before, during, and after the passages of major solar eclipses for the years 2006–2010. We use four times a day of meteorological analysis from the European Centre for Medium Range Weather Forecast (ECMWF) global meteorological analysis to construct non-eclipse effect temperature profiles for the same eclipse passages. The eclipse effects were calculated based on the difference between F3C and ECMWF profiles. A?total of five eclipse cases and thirteen non-eclipse cases were analyzed and compared. We found that eclipses cause direct thermal cooling in the troposphere and indirect dynamic warming in the stratosphere. These results are statistically significant. Our results show ?0.6 to ?1.2°C cooling in the troposphere and 0.4 to 1.3°C warming in the middle to lower stratosphere during the eclipses. This characteristic stratosphere-troposphere coupling in temperature profiles represent a distinctive atmospheric responses to the solar eclipses.     

Spectral analysis of 3D MHD models of coronal structures

We study extreme-ultraviolet emission line spectra derived from three-dimensional magnetohydrodynamic models of structures in the corona. In order to investigate the effects of increased magnetic activity at photospheric levels in a numerical experiment, a much higher magnetic flux density is applied at the photosphere as compared to the Sun. Thus, we can expect our results to highlight the differences between the Sun and more active, but still solar-like stars. We discuss signatures seen in extreme-ultraviolet emission lines synthesized from these models and compare them to observed signatures in the spatial distribution and temporal evolution of Doppler shifts in lines formed in the transition region and corona. This is of major interest to test the quality of the underlying magnetohydrodynamic model to heat the corona, i.e. currents in the corona driven by photospheric motions (flux braiding).     

Presolar Isotopic Signatures in Meteorites and Comets: New Insights from the Rosetta Mission to Comet 67P/Churyumov–Gerasimenko

Comets are considered the most primitive planetary bodies in our Solar System, i.e., they should have best preserved the solid components of the matter from which our Solar System formed. ESA’s recent Rosetta mission to Jupiter family comet 67P/Churyumov–Gerasimenko (67P/CG) has provided a wealth of isotope data which expanded the existing data sets on isotopic compositions of comets considerably. In this paper we review our current knowledge on the isotopic compositions of H, C, N, O, Si, S, Ar, and Xe in primitive Solar System materials studied in terrestrial laboratories and how the Rosetta data acquired with the ROSINA (Rosetta Orbiter Sensor for Ion and Neutral Analysis) and COSIMA (COmetary Secondary Ion Mass Analyzer) mass spectrometer fit into this picture. The H, Si, S, and Xe isotope data of comet 67P/CG suggest that this comet might be particularly primitive and might have preserved large amounts of unprocessed presolar matter. We address the question whether the refractory Si component of 67P/CG contains a presolar isotopic fingerprint from a nearby Type II supernova (SN) and discuss to which extent C and O isotope anomalies originating from presolar grains should be observable in dust from 67P/CG. Finally, we explore whether the isotopic fingerprint of a potential late SN contribution to the formation site of 67P/CG in the solar nebula can be seen in the volatile component of 67P/CG.     

Nucleosynthesis in Supernovae

We present the status and open problems of nucleosynthesis in supernova explosions of both types, responsible for the production of the intermediate mass, Fe-group and heavier elements (with the exception of the main s-process). Constraints from observations can be provided through individual supernovae (SNe) or their remnants (e.g. via spectra and gamma-rays of decaying unstable isotopes) and through surface abundances of stars which witness the composition of the interstellar gas at their formation. With a changing fraction of elements heavier than He in these stars (known as metallicity) the evolution of the nucleosynthesis in galaxies over time can be determined. A complementary way, related to gamma-rays from radioactive decays, is the observation of positrons released in \(\beta^{+}\)-decays, as e.g. from \(^{26}\mbox{Al}\), \(^{44}\mbox{Ti}\), \(^{56,57}\mbox{Ni}\) and possibly further isotopes of their decay chains (in competition with the production of \(e^{+}e^{-}\) pairs in acceleration shocks from SN remnants, pulsars, magnetars or even of particle physics origin). We discuss (a) the role of the core-collapse supernova explosion mechanism for the composition of intermediate mass, Fe-group (and heavier?) ejecta, (b) the transition from neutron stars to black holes as the final result of the collapse of massive stars, and the relation of the latter to supernovae, faint supernovae, and gamma-ray bursts/hypernovae, (c) Type Ia supernovae and their nucleosynthesis (e.g. addressing the \(^{55}\mbox{Mn}\) puzzle), plus (d) further constraints from galactic evolution, \(\gamma\)-ray and positron observations. This is complemented by the role of rare magneto-rotational supernovae (related to magnetars) in comparison with the nucleosynthesis of compact binary mergers, especially with respect to forming the heaviest r-process elements in galactic evolution.     

The need for a United Nations space policy

The international community is entering an era of shared global utilities from space and is increasingly reliant on space systems and activities that support a myriad of applications and utilities on Earth. A growing number of states are seeking to develop or extend their space capabilities. At the same time, a variety of non-state actors are also extending their involvement in space activities. The United Nations is the principal inter-governmental forum to deal with various space issues of global importance. Moreover, the United Nations system itself has become increasingly reliant on space systems for its day-to-day operations. In order for the United Nations to play its necessary role in the space arena, it will need to be supported by a space policy. A United Nations space policy would provide over-arching guidance on space activities for UN stakeholders in the space arena; it would inform UN participation in space activities and would promote improved coordination and cooperative governance of outer space activities. A world without a common UN space policy will not be able to respond to the challenges of the rapidly evolving space arena in the 21st century.     

Investigation of thermosolutally caused convection during -growth of BiSbTe3-mixed crystals at normal and reduced gravity

BiSbTe₃-mixed crystals have been grown at normal and reduced gravity (during the MIR'97-mission) using a -configuration of the TITUS facility. The distribution of the components in the melt, and so the homogeneity of the growing crystal, is strongly influenced by the flow in the melt even in the case of weak convection. The flow configuration in the melt especially in front of the solid-liquid phase boundary can be investigated by means of a segregation analysis of the system components and an additional Pb-dopant. The BiSbTe₃-system is because of its hydro-dynamic properties a typical representative of semiconductor melts (low number, high number) but there are also some special properties relating to the segregationally caused enrichment of the lighter tellurium at the phase boundary and the resulting solutal destabilities. Experimental experiences from segregation analysis have shown that the mass transport in the melt at normal gravity is mainly influenced by convective mixing determined by thermally and solutally caused buoyancy forces. Numerical simulations have been performed for the real experimentally used configurations. These simulations have shown that a strong coupling of thermal and solutal effects exists and have given axial as well as radial segregation profiles being in excellent agreement with the experimental results for the vertical normal gravity grown crystals. For micro gravity conditions a reduction of the flow velocity of more than two orders of magnitude (depending on the micro gravity level and the direction of the residual acceleration) resulting in diffusion controlled component segregation has been predicted.The results of the two micro gravity grown crystals, especially the axial and radial segregation profiles as a sensitive indicator for the flow configuration in front of the phase boundary will be given and discussed in the paper. They will be compared with the results of numerical simulations of the melt flow for the real processing parameters measured during the TITUS growth processes and with experimental as well as numerical results for vertical normal gravity grown reference Samples.     

The stable transition to strategic defences An example of the empty set

The Bush administration is committed to achieving the rapid development and early deployment of some kind of space-based missile defence, with Brilliant Pebbles the favoured candidate. This article examines the conditions necessary to maintain stability during the extended period of transition from offence to defence dominance, and concludes that an agreement incorporating these conditions is most unlikely to be achieved. If the superpowers could agree to such a transition, with its prerequisite of virtually total strategic disarmament, they would agree to nuclear disarmament itself.     

Analysis of a double gimbaled reaction wheel spacecraft attitude stabilization system

Three axis attitude stabilization of a satellite using a single spinning reaction wheel mounted on a two degree-of-freedom passively and actively torqued gimbal system is investigated. The passive control is assumed to be provided by a spring-loaded damper mounted on each of the gimbal axes, while active control results from both the wheel acceleration and the torque applied about the gimbal axes. The stability of the uncontrolled and passively controlled systems is investigated analytically. For constant wheel speed the pitch motion is decoupled from the roll-yaw and gimbal motions. Control laws for the roll-yaw motion are developed based on pole clustering and linear optimal control theory. For the pitch motion control laws are obtained based on classical second order system theory. Estimation techniques are applied to the roll-yaw system for the case when the complete state may not be directly observable (in the absence of a fine yaw position sensor).     

The Theory of Gamma-Ray Bursts

This chapter gives a brief review on the theory of gamma-ray bursts (GRBs), including the models of multi-messengers (e.g., prompt multiwavelength electromagnetic emissions, high-energy neutrinos, ultra-high-energy cosmic rays, and gravitational waves) and central engines (in particular, mergers of binary neutron stars for short GRBs). For detailed reviews, please see (Piran in Phys. Rep. 314:575, 1999; Rev. Mod. Phys. 76:1143, 2004; Mészáros in Annu. Rev. Astron. Astrophys. 40:137, 2002; Rep. Prog. Phys. 69:2259, 2006; Zhang and Mészáros in Int. J. Mod. Phys. A 19:2385, 2004; Zhang in Chin. J. Astron. Astrophys. 7:1, 2007; Nakar in Phys. Rep. 442:166, 2007; Kumar and Zhang in Phys. Rep. 561:1, 2015).     

Lunar ground penetrating radar: Minimizing potential data artifacts caused by signal interaction with a rover body

Ground-penetrating radar (GPR) is the leading geophysical candidate technology for future lunar missions aimed at mapping shallow stratigraphy (<5 m). The instrument’s exploration depth and resolution capabilities in lunar materials, as well as its small size and lightweight components, make it a very attractive option from both a scientific and engineering perspective. However, the interaction between a GPR signal and the rover body is poorly understood and must be investigated prior to a space mission. In doing so, engineering and survey design strategies should be developed to enhance GPR performance in the context of the scientific question being asked. This paper explores the effects of a rover (simulated with a vertical metal plate) on GPR results for a range of heights above the surface and antenna configurations at two sites: (i) a standard GPR testing site with targets of known position, size, and material properties, and; (ii) a frozen lake for surface reflectivity experiments. Our results demonstrate that the GPR antenna configuration is a key variable dictating instrument design, with the XX polarization considered optimal for minimizing data artifact generation. These findings could thus be used to help guide design requirements for an eventual flight instrument.